實驗室臭氧產生機

實驗室臭氧產生機

偉吉達企業有限公司
產品名稱: 實驗室臭氧產生機
英文名稱:
產品型號:
產品規格:
供應商: 偉吉達企業有限公司
品牌: Ozonia
產地名稱:
聯系我們:
更新時間: 2022/5/19 下午 04:19:00
偉吉達企業有限公司
地址: 新北市中和區中正路1211號13F之3
郵編: 235
所在區域: 北部.基隆市
電話: 02-2228 9607
傳真: 02-2228 8524
聯系人: 周小姐
Email:
公司展臺: 點擊進入

實驗室臭氧產生機詳細資料

LAB2B OZONE GENERATOR
DESKTOP OZONE GENERATOR
FOR LABORATORIES & RESEARCH

OZONE GENERATOR MODEL LAB2B

The ozone generator is a small air cooled unit specifically design for bench use incorporating function indicator, feed gas flowmeter and variable output control.
The generator comprises of a high voltage/high frequency power supply unit and an air-cooled corona discharge module housed in a mild steel epoxy coated enclosure.

ELECTRONIC POWER BOARD

The ozone generator incorporates a high voltage/high frequency power board designed for either intermittent or continuous operation.
The variation is manually adjustable by a control knob mounted on the front panel of the unit.
The unit has been designed to operate on various feed gasses such as dried air or oxygen and is capable of producing concentrations up to 10 volume.

OZONE GENERATOR MODULE

The module consists of a ceramic dielectric tube inside which is centralised a 316 SS electrode assembly supported at either end by P.T.F.E. end caps.
The ceramic is housed within a finned heatsink block which is cooled by fan assisted atmospheric air.
The complete module assembly can be easily removed and dismantled for general maintenance and cleaning.

FEATURES

Units can operate either under vacuum or at a maximum outlet pressure of 10 psig.
Units can be combined to give larger ozone outputs if required.
Operating and maintenance instructions including performance graphs.
Full twelve months warranty and technical back-up facilities available.

QUALITY ASSURANCE AND TESTING

All products tested with BS EN ISO 9002.:94 quality assurance procedures and each generator is subjected to the following test procedure.
1.Power board function test.
2.Power board load test for 24 hours in 40℃ test chamber.
3.Module pressure test.
4.Complete unit test for 24 hours.
5.Calibration test and output check.


TECHNICAL INFORMATION

OZONE OUTPUT:4.0 GM/HR (FEEDGAS:DRY AIR -60℃ DEWPOINT)
OZONE OUTPUT:10.0 GM/HR (FEEDGAS:100 OXYGEN)
FEED GAS FLOWRATE:4-10 LTR/MIN AIR 2-5 LTR/MIN OXYGEN
OPERATING METHOD:VACUUM OR PRESSURE (10 psi max.)
MODULE COOLING MEDIUM:AMBIENT AIR (FAN ASSISTED)
VARIABLE OUTPUT CONTROL:15-100

POWER SUPPLY:230V-1PH-50HZ OR 115V-1PH-60HZ
POWER CONSUMPTION:105 WATTS
CONNECTIONS:PVDF COMPRESSION FITTING TO SUIT 8mm OD PIPE
WEIGHT:6 KG

CONTROLS & INDICATIONS

OZONE ON-OFF:GREEN ILLUMINATED SWITCH
FAULT:RED ILLUMINATED INDICATOR
FLOWMETER:2-10 LTR/MIN

公司聯絡卡
偉吉達企業有限公司 [訪問展臺]
 地址:   新北市中和區中正路1211號13F之3  連絡人: 周小姐
 郵遞區號: 235  電話: 02-2228 9607
 傳真: 02-2228 8524  區域: 北部.基隆市
 Email:    
相關產品
copyright ®TaiwanLab 版權所有
要在臺灣實驗室網投放廣告或成為我們的特約贊助商,請聯繫我們